HomeSearch by PurposeConfiguring Reset Operations (for the administrator)

Configuring Reset Operations (for the administrator)

To change the time required to reset the system and the mode to be displayed after resetting ([System auto reset])

To display:
  • [Utility]
    • [Administrator]
      • [System Settings]
        • [Reset Settings]
          • [System auto reset]

Select whether to reset all settings (except registered settings) when this machine has not been operated for a certain period of time.

Setting

Description

[System auto reset function]

When using the system auto reset function, set this option to ON (default: ON).

[System Auto Reset Time]

Specify the time required to reset (default: [1] minute, available range: [1] to [9] minutes).

[Screen to display after startup/Reset]

Select a screen that is to be displayed preferentially after resetting (default: [Main Menu]).

[Screen Saver Function]

When displaying the screen saved, set this option to ON (default: OFF).

The screen saver is displayed after the time specified in [System Auto Reset Time] lapsed.

  • Log out of the Administrator Setting or User Auth/Account Track mode according to the time setting for [System Auto Reset Time] when user authentication/account track is active or the [Enhanced Security Mode] is enabled. When [System auto reset function] is set to OFF, you are logged out in 1 minute.

To change the time required to reset the currently updated settings ([Auto Reset])

To display:
  • [Utility]
    • [Administrator]
      • [System Settings]
        • [Reset Settings]
          • [Auto Reset]

When resetting all the entered settings (except registered settings) when no operation is performed on the Web browser screen for a certain period of time, set this option to ON (default: ON). Also, specify the time required to reset (default: [1] minute).

To reset condition settings when changing users ([Job Reset])

To display:
  • [Utility]
    • [Administrator]
      • [System Settings]
        • [Reset Settings]
          • [Job Reset]

Select whether to reset settings for the conditions that are applied when changing users.

Setting

Description

[UserChange]

To initialize all settings (except registered settings) when the key counter or management card is removed, set this option to ON (default: ON).

[Next Job]

This function is not available in this machine.