HomeDescriptions of Functions / Utility Keys1st Z-Fold Position Adjustment

1st Z-Fold Position Adjustment

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [1st Z-Fold Position Adjustment]

Use this option to adjust the 1st Z-fold position.

Copy after configuration, then repeat adjustments as required.

Settings

Description

[Paper Type]

Select the paper type to adjust the fold position for.

[Adjust Value]

Enter an adjustment value between -12.8 and 12.7 mm by tapping [-] and [+].

  • [-]: Move the punch position to the right.

  • [+]: Move the punch position to the left.

[0.0 mm] is specified by default.

  • To use this function, the optional Finisher FS-537/FS-537 SD and Z Folding Unit are required (only in bizhub C658/C558/C458).

  • Make adjustment while checking paper folded at a displaced position.

  • The value you set by selecting [All] in [Paper Type] will be added to the setting for each paper type.