Card Authentication

[IC Card type setting]

Select whether to permit a use for each IC card type.

• Specify the authentication destination in [Authentication Assignment Dest.]. You can select the authentication server group or MFP, which is specified in [LDAP-IC Card Authentication Setting], as the authentication destination. In addition, you can specify up to three authentication destinations to search for their user information in parallel.
  Specify [Authentication Assignment Dest.] when [ON (External Server)] or [ON (MFP + External Server)] is selected in [General Settings] - [User Authentication] while the IC card type is set to FeliCa, TypeA, MIFARE(PID), or NFC(HCE). The MFP can be specified as the authentication destination only when [ON (MFP + External Server)] is selected in [General Settings] - [User Authentication].

• When using [SSFC], you can register detailed information such as the company identification code or company code.

• When using [FCF], you can register the section code.

• When using [FCF (Campus)], you can register the campus identification code.

• When using [MIFARE(PID)], register detailed information such as the key code.

[Operation Settings]

Select how to log in to this machine (default: [Card Authentication]).

• [Card Authentication]: Logs in simply by placing your IC card on the authentication unit.

• [Card Authentication + Password]: Logs in by placing the IC card on the authentication unit and entering the password.

• [IC Card Authentication + PIN Code Authentication]: Logs in by placing the IC card on the authentication unit and entering the PIN code. This setting is displayed when VLAN is set.

[Authentication Card ID Number]

When notifying the card ID to collect counter information, set this option to ON (default: OFF).