HomeDescriptions of Functions / Utility KeysStore Print Documents Settings

Store Print Documents Settings

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Connection]
        • [Serverless Pull Printing Settings]
          • [Store Print Documents Settings]

Configure settings to use the storage function for serverless pull printing.

If the storage function is enabled, you can store print jobs sent from a computer on the storage machine.

Settings

Description

[Store Print Documents Usage Settings]

Select whether to use the storage function.

To use the storage function, select [Enable].

If a setting is changed as shown below, [Store Print Documents Usage Settings] is forcibly set to [No Limit].

  • The authentication method has been canceled or changed to another one.

  • [Enhanced Security Mode] has been changed to enable.

If [Store Print Documents Usage Settings] is changed from [Enable] to [No Limit], all print jobs stored on the storage machine are deleted.

[Delete after Print Setting]

Select whether to automatically delete print jobs stored on the storage machine each time they are executed.

This option is available when [Store Print Documents Usage Settings] is set to [Enable].

[Document Delete Time Setting]

Specify the time to automatically delete print jobs stored on the storage machine.

This option is available when [Store Print Documents Usage Settings] is set to [Enable].

  • When specifying the time in units of days, select [1 day], [2 days], [3 days], [7 days], or [30 days].

  • When specifying the time in hours, select [Time], then enter the hour value.

  • To keep print jobs on the storage machine, select [Save].

[Delete All Documents]

Deletes all print jobs stored on the storage machine.

This option is available when [Store Print Documents Usage Settings] is set to [Enable].

  • This function is available when the topology function is disabled.